中文    English
HOME ABOUT PRODUCT EQUIOMENT CASE NEW CONTACT
 

The principle of a chartered plane

I. working principle
Packaged objects in the baling press center, the first right acrosome, the front end of the compression zone, tied belt tightening on the object, then left the top body rise, the lower clamping band position, heating into two belt, the middle of the top knife, cut the ribbon, the next strapping tape in place, to complete a working cycle. Packed in cartons.
2. Workflow
Tape to send in place to receive strapping signal, brake release, main motor startup (1) - > right knife rising, to resist the right belt in skateboard (2) - > type "T" guide back (3) - > proximity switch induction to bring back the probe (4) and main motor stalling, brake and (5) - > packing machine with motor rotation, back out with 0.35 seconds (6) - belt tightening bundle on the object (7) and main motor second start, brake and posed rod (8) and a secondary drawstring, tighten belt (9) - > left acrosome, the lower clamping belt (10) - heating into two straps (11) - in the middle top knife, cut off the tape (12) to the top knife down (13), the top knife to rise again, make the two straps and strong adhesion (14) in the top knife down, around the top knife fell at the same time.

联系我们

地址: No. 2 Heng Jing Road, Kunshan Development Zone

联系人: Mr. Zhang

传真: 0512-57288556

手机: 18913223927

邮箱: 707268200@qq.com

Mananger : Mr. Wu Mobile: 18913223927     Fax: 0512-57286616
address: No. 2 Heng Jing Road, Kunshan Development Zone
在线客服